Regi_Feed_Empty Sensor - Samsung ProXpress M337x Service Manual

3. Disassembly and Reassembly

3.3.21. Regi_Feed_Empty Sensor

1. Remove the cassette and duplex unit.
2. Remove the PLATE-FRAME BOTTOM after removing
4 screws.
3. Remove the sensor cover after removing 2 screws.
4. For the sensor to require replacement, unplug the
connector then replace it.
3-21
5. Remove the sensor cover after removing 2 screws.
6. Unplug the connector then release the empty sensor.
Copyright© 1995-2013 SAMSUNG. All rights reserved.