Platen Unit - Samsung ProXpress M337x Service Manual

3. Disassembly and Reassembly

3.3.5. Platen Unit

1. Remove the right cover. (Refer to 3.3.1)
2. Remove the ADF/RADF Unit. (Refer to 3.3.3)
3. Remove the OPE Unit. (Refer to 3.3.4)
4. Unplug the scanner connectors from the main board.
5. Remove the screw cap.
6. Remove 3 screws.
3-9
7. Remove 2 screws from the rear.
8. Lift up and re the platen unit.
NOTE
When reassembling the platen unit for M4072FD, put it
on the middle cover and pull it to the back.
Copyright© 1995-2013 SAMSUNG. All rights reserved.