Paper Empty In Tray 1 / Paper Is Empty In Tray 1. Load Paper; All Tray Empty / Paper Is Empty In All Tray. Load Paper - Samsung ProXpress M337x Service Manual

Proxpress m337x/m387x/m407x series mono laser mfp
Hide thumbs Also See for ProXpress M337x:
Table of Contents

Advertisement

► Error Code
M1-5112
M1-5113
M1-5120
► Error message

Paper empty in tray 1 / Paper is empty in tray 1. Load paper

All Tray Empty / Paper is empty in all tray. Load paper

► Symptom
There is no paper in the tray1. / Actuator-Paper Empty or photo sensor is defective.
► Troubleshooting method
1) Load the paper in the tray1.
If the problem persists, check the followings after turning the machine off.
2) If the Actuator-Paper Empty(JC66-02762A) is defective, replace it.
(Refer to 3.3.21)
3) If the photo sensor(0604-001393) is defective, replace it. Check if the connector is connected properly.
4) If the problem persists, replace the main board.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-58

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents