Lsu (Laser Scanning Unit) - Samsung ProXpress M337x Service Manual

2. Product Specifications

2.2.4.4. LSU (Laser Scanning Unit)

It is the core part of the LBP which switches from the video data received to the controller to the electrostatic latent image
on the OPC drum by controlling laser beam, exposing OPC drum, and turning principle of polygon mirror. The OPC drum is
turned with the paper feeding speed. The HSYNC signal is created when the laser beam from LSU reaches the end of the
polygon mirror, and the signal is sent to the controller. The controller detects the HSYNC signal to adjust the vertical line of
the image on paper. In other words, after the HSYNC signal is detected, the image data is sent to the LSU to adjust the left
margin on paper. The one side of the polygon mirror is one line for scanning.
Motor Driver
LD (Laser Diode)
Protector panel
2-23 Copyright© 1995-2013 SAMSUNG. All rights reserved.