Paper Empty In Mp / Paper Is Empty In Mp Tray. Load Paper; Paper Empty In Manual Feeder / Paper Is Empty In Manual Feeder. Load Paper - Samsung ProXpress M337x Service Manual

Proxpress m337x/m387x/m407x series mono laser mfp
Hide thumbs Also See for ProXpress M337x:
Table of Contents

Advertisement

4. Alignment and Troubleshooting
► Error Code
M1–5612
M1–5712
► Error message

Paper empty in MP / Paper is empty in MP tray. Load paper

Paper Empty in manual feeder / Paper is empty in manual feeder. Load paper

► Symptom
There is no paper in the MP tray (or Manual Feeder). / Actuator-Paper Empty or photo sensor is defective.
► Troubleshooting method
1) Load the paper in the tray1.
If the problem persists, check the followings after turning the machine off.
2) If the Actuator-Paper Empty(JC66-02762A) is defective, replace it.
(Refer to 3.3.21)
3) If the photo sensor(0604-001393) is defective, replace it. Check if the connector is connected properly.
4) If the problem persists, replace the main board.
4-59
Copyright© 1995-2013 SAMSUNG. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProXpress M337x and is the answer not in the manual?

Table of Contents

Save PDF