Fuser Error :#02-000 Please Turn Off Then On - Samsung CLX-6220 Troubleshooting Manual

Code
02-000
Symptom
At Warm-up, this error has occurred. The machine does not work until power off/on. If the error code reoccurs,
follow the "Troubleshooting method" below.
Possible Cause
Fuser Unit is not installed and AC is not supplied to the Heat Lamp.
Troubleshooting method
1. Turn off the power. And turn on the power.
2. If the problem persists, replace the fuser unit.
3. If the problem persists after replacing the fuser unit, reconnect the CN35 connector on Main-PBA.
4. If the problem persists, replace the Main-PBA.
Service Manual
Alignment & Troubleshooting
Error message

Fuser Error :#02-000 Please turn off then on.

CN35 CN35 Thermistor Thermistor
4-39
Samsung Electronics