Settings (Step 3 Setting Using the V.Networks Controller)
3-7 Preset Position Setting
The "V.Networks Controller" can be used to set the preset position for the connected
camera.
1.
Select a camera.
2.
Select [Setting] and [Position Memory].
<Image Quality Setting Screen>
3.
When setting is complete, click
68
1
Select a camera for setting from the pull-
down menu for the camera.
1
Select a position.
2
The title of the current position will be
displayed.
Enter here to change the title. (Up to 32
single-byte characters (32 bytes))
3
Adjust the angle of view and zoom.
4
Adjust the image quality.
Click
Quality Setting screen.
(For details on set values,
Page 66)
followed by
to display the Image
☞
Page 64 to
.