Table of Contents
Advertisement
Preparation (Step 1 Connection/Installation)
1-1 Connecting Cables
● Attachment of a embedded cover in the ceiling (recess bracket) may be mandatory in certain
regions. If this is so, ensure that the embedded cover (recess bracket) is securely attached
before installing the camera.
● Ensure to attach the cover for the ceiling mount. Installation is not possible without attaching
the cover. In addition, the cover also prevents penetration of foreign objects into the ceiling
mount. Penetration of foreign objects may cause a malfunction or, in the worst scenario,
cause smoking or fire.
1. Connection Procedure
Cover Fastening
Screw
Cover
Ceiling
Mount
14
75
Safety Wire Mounting Hole
Cautions
1.
Make a hole in the ceiling
Make use of the template supplied to open a
hole ( 75) for leading the connection cable
through the rear side of the ceiling.
2.
Remove the cover
To remove the cover from the ceiling mount,
loosen the fastening screw on the cover,
followed by turning the cover in the anti-
clockwise direction.
Advertisement
Table of Contents
