Adjusting The Camera Position - JVC TK-T2100RU Instructions Manual

2.4 Adjusting the Camera Position

The dome camera has th ree axes for positioning the camera. While monitoring the picture on the monitor,
adjust the camera position as follows:

Pan Adjustment: Rotate 3D assembly in the base. Do not turn assembly more than ±177°as this may
cause the internal cables to twist and disconnect or break.

Tilt Adjustment: After loosening the screw on the bracket, position the camera as desired, then tighten
the screw back to the bracket. (TILT range 30° - 90°)

Horizontal Rotation: For wall mount and tilted ceilings, rotate the lens base (maximum ±180°) until
you are satisfied with the field of view.
①
②
③
F 2.3 A
IGURE DJUSTING THE
1. Rotate 3D assembly in base for horizontal adjustment
2. Tilt adjustment bracket and screw for vertical
adjustment
3. Axis ring for horizontal rotation for wall mount and
tilted ceilings
C P
AMERA OSITION
9