2.3 Adjusting the Camera Position
1.
Loosen the adjustment screws and rotate the adjustment ring. Adjust the angle for optimum image
view.
2.
After the adjustment, re-tighten the adjustment ring and fasten the adjustment screws.
3.
To prevent the camera falling off, suggest tightening a safety wire to a firm place (ceiling slab or
wall). Please screwed the safety wire onto the camera. Safety wire is not supplied.
F
2.2 M
IGURE
OUNTING THE
Adjustment screw
F
2.3 A
IGURE
DJUSTING THE
7
Rubber pad
C
AMERA
C
P
AMERA
OSITION
Adjustment ring
Safety Wire
(fall prevention wire,
not supplied)