Table of Contents
Advertisement
3.
Perform setting.
<Position Setting Controller>
4.
Close the window.
When setting is complete, click
1
Set Auto Pan operation using the [Action
Mode] pull-down menu.
• Right
• Left
• Return : Moves continuously between the
2
Set the speed of operation from the
[Speed] pull-down menu.
(Set value: High, Normal, Low)
3
Set the start position of the operation.
Set the start position using the position
setting control panel, followed by clicking
.
If Pan/Tilt is operated after setting the
start position, click
camera to its start position.
4
Set the return position of the operation.
(This can be specified only when [Mode]
is set to "Return".)
Set the return position using the position
setting control panel, followed by clicking
.
If Pan/Tilt is operated after setting the
return position, click
camera to its start position.
Note
For starting and stopping operations of
Auto Pan, Auto Patrol and Auto Trace,
please refer to Page 59.
to close the window.
: Rotates horizontally in the
clockwise direction from the
start position.
: Rotates horizontally in the anti-
clockwise direction from the start
position.
start and return positions
horizontally.
to move the
to move the
73
Advertisement
Table of Contents
