JVC V.NETWORKS VN-C625 Instructions Manual page 27

3.
Select [Internet Protocol (TCP/IP)] and click [Properties].
4.
Select [Use the following IP address], set the [IP address] and [Subnet mask] and
click .
5.
Click on the [Local Area Connection Properties] screen.
1
Select [Internet Protocol (TCP/IP)].
2
Click [Properties].
1
Select [Use the following IP address].
2
Set [IP address] to 192.168.0.3.
Note
• Make sure to note down the original
IP address before changing.
• Do not use the same IP address
elsewhere within the same network
environment.
3
Set Subnet mask to an appropriate value.
Ask the network administrator if
necessary.
4
Click .
27