Table of Contents
Advertisement
3-6 Setting Preset Position
Set the preset position of the connected camera using V.Networks Controller.
1.
Select the camera.
2.
Select [Setting] and [Position Memory].
3.
Perform the setting.
1
Select the camera for setting from the pull
down menu of the camera.
1
Select [Position Memory] from the pull down
menu of [Setting].
1
Select the position.
2
The title of current position will be displayed.
Key-in here when changing the title.
3
Adjust the viewing angle and zoom.
4
Adjust the picture quality.
The following screen will be displayed if
"
" is clicked.
Detailed setting value
5
The setting will be registered.
☞
Page 55 to Page 59
61
Advertisement
Table of Contents
