JVC V.NETWORKS VN-C625 Instructions Manual page 40

Settings (Step 2 Network Settings)
2-4 Other Settings Using the "VN-C625U Setup Tool" (3. Alarm Setting) (Continued)
Alarm Input (Continued)
Item
4
List
Other Triggers
Item
5
Preset Position
• Mode
• Alarm Output
• Black & White
• Message Packet
6
Motion Detection
• Mode
• Alarm Output
• Message Packet
• Alarm FTP
7
Black & White
• Mode
• Alarm Output
• Go to a preset
position
• Return Mode
• Interval
• Message Packet
40
Press here to display the IP address of the PCs to which an
alarm notification is sent. ("Distribution Address List" Screen)
To delete a distribution address, select the IP address to de-
lete, followed by pressing the Delete button.
Notes
• The list allows setting of up to 10 addresses.
• Message packets will not be sent out when there are 11 or
more addresses.
For performing the following operations by using movement to
preset positions as triggers.
* Please refer to the [Alarm 1/2] item for details on the set val-
ues.
For setting alarm operations when motion is detected within
the area specified in the motion detection settings.
* Please refer to the [Alarm 1/2] item for details on the set val-
ues.
For performing the following operations by using switches
between the Color and Black & White modes as triggers.
* Please refer to the [Alarm 1/2] item for details on the set val-
ues.
Note
The Black & White alarm may be activated upon
•
restarting VN-C625.
Function/Set Value
Function/Set Value
Initial Value
—
Initial Value
—
*Please
refer to
the [Alarm
1/2] item
for the
initial
values.
—
*Please
refer to
the [Alarm
1/2] item
for the
initial
values.
—
*Please
refer to
the [Alarm
1/2] item
for the
initial
values.