Table of Contents
Advertisement
3-14 Changing Registered Information
The "V.networks Controller" can be used to change information such as the preset
connection method for a camera.
1.
Select [Setting] and [Property].
2.
Perform setting.
3.
When alteration is complete, click
Caution
Information cannot be changed for a camera that is currently connected.
1
Change the camera.
Cannot be changed.
2
Recorded files will be stored in the folder
specified here.
3
Select the mode for image acquisition.
*For details, refer to Page 56.
4
Set whether to [ON].
.
79
Advertisement
Table of Contents
