1.4 Routine Maintenance
Please use a soft and dry cloth to remove any fingerprint or dust to clean the housing. For more stubborn
stains, use a cloth dampened with a small quantity of neutral detergent to wipe dry.
Caution
Do not use volatile solvents such as alcohol, benzene or thinners to avoid damaging the
surface finish.
2. Installation and Connection
2.1 Connecting the Wiring
Connect the camera power/video cable and external power/video cable together.
2.2 Mounting the Camera
1.
Affix the mounting template to desired location. Drill three holes on the installation surface and insert
provided anchors into the pre-drilled holes.
2.
Install a rubber pad and the bracket base onto the installation surface and fasten securely using the
provide screws.
Note
Use screw (TP4-25L) and plastic anchors (1/4" x 1 3/8") are provided for this purpose.
•
For static electricity protection, ensure that the rubber pad is placed inside the mounting
bracket base.
Caution
•
For DC power supply use, make sure the polarity is correct to avoid malfunction and / or
camera damage.
F
2.1 C
IGURE
ONNECTING THE
6
W
IRING