Table of Contents
Advertisement
Programming
3.3 Program Change Options
70
Technical Manuals Online! - http://www.tech-man.com
3.3.1 Overview
This section covers the following Program Change options:
Topic
Refer to
Clear programming
"How to Clear a Program from Memory (0=clr)" on page 73
memory
Autoprogram the control
"How to Autoprogram the Control Panel (1=auto)" on page 73
panel
Program a point for a:
• detector
"How to Program an Intelligent Detector" on page 80
• monitor module
"How to Program a Monitor Module" on page 81
• control or relay
"How to a Program a Control or Relay Module" on page 83
module
"How to Program a Panel Circuit" on page 84
• panel circuit
Change a programming
"How to Change a Programming Password (3=passwd)" on page 85
password (Program
Change or Status
Change)
Create or change the
"How to Change a System Message (4=message)" on page 86
system message on the
display
Create or change a
"How to Change a Zone Label (5=zones)" on page 86
custom zone label
Change the program for
"How to Edit a Special Zone (6=spl zones)" on page 87
special Zones 90
through 99
Change system
"How to Edit System Functions (7=sys)" on page 89
functions
Check the program for
"How to Check the Program (8=check)" on page 92
errors
Table 15 Program Change Topics
Program Change Options
AFP-200 PN 15511:H2 10/14/2002
Advertisement
Table of Contents
