Table of Contents
Advertisement
Terminal Interface Protocol
Press
C
Press
11111
W
Press
1
174
Technical Manuals Online! - http://www.tech-man.com
I.4.2 Accessing Alter Status Options
Access the Alter Status function from the CRT-2 by following these steps.
1.
Turn on the CRT-2 connected to the control panel.
2.
Press the Alter Status function key. The control panel displays the Alter Status
menu options:
Enter Status Change Password or Escape to Abort
3.
Enter the Status Change Password. The factory default Status Change Password is
11111. The password does not display on the CRT-2. Five asterisks will appear in
place of the password:
*****
The Alter Status Options menu appears:
1=Disable 2=Sensitivity 3=Clear Verification 4=Clear History 5=Set Action/Alert
From the Alter Status Options menu, you can select options 1-5.
I.4.3 Enable or Disable Detectors, Modules, or Bell Circuits
From the Alter Status menu, select Disable, option 1. Disable lets you enable or disable
detectors, modules, or bell Circuits:
Disable/Enable D(Det.) / M(Mod.) / B(Bell ckt.), AA
Enter the following:
1.
Enter the first letter to read one of the following:
• Detector
• Module
• Bell Circuit (NAC)
2.
Enter the address or number of the device.
3.
Press <Enter> and a display similar to the following will appear.
Using the CRT-2 for Alter Status
Address or number
AFP-200 PN 15511:H2 10/14/2002
Advertisement
Table of Contents
