General Information - Toyota 1991 CAMRY Body Section Repair Manual

AR-2

GENERAL INFORMATION

Anti-rust treatment is necessary before welding and before and after the painting process.
ANTI-RUST TREATMENT BEFORE WELDING
1. WELD-THROUGH PRIMER (SPOT SEALER)
APPLICATION
For anti-corrosion measures, always apply the weld-
through primer (spot sealer) to welding surfaces
where the paint film was removed.
NOTE: Apply the weld-through primer (spot seal-
er) so that it does not ooze out from the joining
surfaces.
ANTI-RUST TREATMENT BEFORE PAINTING PROCESS
1. BODY SEALER APPLICATION
For waterproofing and anti-corrosion measures, al-
ways apply the body sealer to the body panel seams
and hems of the doors, hoods, etc.
2. UNDERCOAT APPLICATION
To prevent corrosion and protect the body from dam-
age by flying stones, always apply the undercoat
enough to the bottom surface of the under body and
inside of the wheel housings.
ANTI-RUST TREATMENT
Weld-Through Primer
(Spot Sealer)
WELD-THROUGH PRIMER (SPOT SEALER)
APPLICATION
Sealer Gun
BODY SEALER APPLICATION
UNDERCOAT APPLICATION