Toyota 1991 CAMRY Body Section Repair Manual page 31

INSTALLATION
Butt Weld
[LH only]
1. Cut the supply part in the same way as removal.
2. Temporarily install the new part, measure each
part in accordance with the body dimension
diagram.
3. After installing the new side member, install the
battery carrier support. (LH only)
BODY PANEL REPLACEMENT
Front Side Member
Front Side Member
Plate
Battery Carrier Support
Front Side Member
No. 6 Reinforcement
NOTE: Weld the front side mem-
ber plate and front side member
No. 5 plate at the same place.
RE-13
Front Side Member
No. 5 Plate
Butt Weld