AR-10
BODY PANEL ANTI-CHIPPING PAINT APPLICATION AREAS
NOTE:
1.
Some areas should be applied before a second coating and the other should be after a finishing
coating.
2.
Wipe off the coating immediately with a rag soaked in grease, wax, and silicone remover, if other
areas are accidently coated.
Front Wheel Arch Area
Front Valance Panel
A-A Cross Section
Apply the anti-chipping paint before a second coating.
Apply the anti-chipping paint after a top coating.
ANTI-RUST TREATMENT
Outer Rocker Panel
B-B Cross Section
Rear Wheel Arch Area
C-C Cross Section