INSTALLATION
1.
Before temporarily installing the new part,
apply body sealer to the windshield header
panel, roof panel reinforcement and back
window opening frame.
NOTE:
1)
Apply just enough sealer for the new part
to make contact.
2)
For other sealing points, refer to section
AR.
BODY PANEL REPLACEMENT
°
30
Body Sealer (12 points)
Body Sealer (9 points)
Cloth Tape
Hemming Tool
Body Sealer (9 points)
Braze (both sides)
2.
Hem the area tip of the roof panel opening.
NOTE:
1)
Bend the flange hem about 30° with a ham-
mer and dolly. Then fasten tightly with a
hemming tool.
2)
Perform hemming three steps, being careful
not to warp the panel.
RE-25
Braze (both sides)