Toyota 1991 CAMRY Body Section Repair Manual page 47

INSTALLATION
Body Sealer (9 points)
1. Before temporarily installing the new part,
apply body sealer to the windshield header
panel, roof panel reinforcement and back
door opening frame.
NOTE:
1) Apply just enough sealer for the new part
to make contact.
2) For other sealing points, refer to section
AR.
BODY PANEL REPLACEMENT
Cloth Tape
°
30
Hemming Tool
Body Sealer (9 points)
Braze (both sides)
2.
NOTE:
1)
2)
Body Sealer (3 points)
Body Sealer (12 points)
Hem the area tip of the roof panel opening.
Bend the flange hem about 30° with a ham-
mer and dolly. Then fasten tightly with a
hemming tool.
Perform hemming three steps, being care-
ful not to warp the panel.
RE-29
Braze
(both sides)