AR-4
BODY PANEL SEALING AREAS
NOTE:
1.
Prior to applying body sealer, clean the area with a rag soaked in grease, wax and silicone
remover.
2.
If weld-through primer was used, first wipe off any excess and coat with anti-corrosion
primer before applying body sealer.
3.
Wipe off any excess body sealer with a rag soaked in grease, wax and silicone remover.
4.
If body sealer is damaged by peeling, cracks, etc., be sure to repair as necessary.
Do not close the drain
beads.
ANTI-RUST TREATMENT
Flat Surfacing
Flat Surfacing