System Data Dump - Panasonic KX-TA624 Installation Manual

804
Description
Selection
Default
Programming
4-128 System Programming
4.2

System Data Dump

Starts or stops printing the assigned data. All or a specific area of
current programmed data is printed out. The areas are as follows.
All Para: All data
System Para: All data except the following programs.
CO Para: Programmed data of [400]–[403], [405]–[423] and
[900].
Ext Para: Programmed data of [102], [516], [600]–[620], and
[904] and [905] if a proprietary telephone is
connected. The assigned data on the PF
(Programmable Feature) buttons and CO buttons are
also printed out.
Programmed data of [102], [516] and [600]–[612] if
a single line telephone is connected. The stored
Personal Speed Dialing numbers are also printed
out.
DSS Para: Data assigned to DSS buttons and PF buttons on the
DSS Consoles.
Speed Dial: Programmed data of [001]
Stop Output: Stops printing.
All Para / System Para / CO Para + outside (CO) line number:
1 – 6, ( = all outside (CO) lines) /
Ext Para + jack number: 01 – 24,
DSS Para + DSS Console number: 1 or 2,
Consoles) / Speed Dial / Stop Output
Not applicable.
1. Enter 804.
Display: System Data Dump
2. Press NEXT.
Display: Menu:All Para
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. If CO Para, Ext Para or DSS Para is selected, enter an
outside (CO) line, jack or DSS Console number.
6. Press STORE.
7. Press END.
System Programming
( = all jacks) /
( = all DSS