Panasonic KX-TA624 Installation Manual page 275

4.2 System Programming
Outside (CO) Line Connection Assignment
Description
Selection
Default
Programming
Condition
Feature Reference
Used to identify which outside (CO) lines are connected to the
system. This prevents users from calling a line which is not
connected.
• Outside (CO) line number: 1 – 6,
• Connect / Not Connect
All outside (CO) lines – Connect
1. Enter 400.
Display: CO Connection
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Connect
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all outside (CO) lines to the same selection, press the
in step 3. In this case, the display will show: CO
Section 3, Features
Outside (CO) Line Connection Assignment
( = all outside (CO) lines)
:Mixed.
System Programming
400
key
4-61