Panasonic KX-TA624 Installation Manual page 232

007
Time (Day/Night/Lunch) Service Start Time
Description
Selection
Default
Programming
4-18 System Programming
4.2
When automatic is programmed in program [006] "Time
(Day/Night/Lunch) Service Changing Mode", this program sets the
starting time on a day of the week basis.
• Day of the week selection:
Sunday / Monday / Tuesday / Wednesday / Thursday /
Friday / Saturday /
• Mode: Day / Night / Lunch-S (lunch starting time) /
Lunch-E (lunch ending time)
• Hour: 1 – 12 / None (no change)
• Minute: 0 – 59
• AM / PM
Every day of the week — Day – 9:00 AM / Night – 5:00 PM /
1. Enter 007.
Display: Day/Night Time
2. Press NEXT.
Display: Day of The Week
3. Press NEXT or PREV until the desired day of the week is
displayed.
To assign every day of the week, press
Display example: Sunday
4. Press SELECT.
Display example: Day
To select another mode, keep pressing SELECT until the desired
selection is displayed.
5. Press .
6. Enter the hour.
To set no change, keep pressing SELECT until "None" is displayed
and go to step 11.
If SELECT is pressed, the display shows the previous entry. If the
previous setting was "None", press SELECT to enter the starting
time.
To change the current entry, press CLEAR and enter the new time.
7. Press .
System Programming
(every day of the week)
Lunch-S – None / Lunch-E – None
instead of NEXT or PREV.
: 9:00AM