Account Codes - Panasonic KX-TA624 Installation Manual

Advanced hybrid system
Hide thumbs Also See for KX-TA624:
Table of Contents

Advertisement

310
Description
Selection
Default
Programming
Conditions
Feature References
4-58
System Programming
4.2

Account Codes

Assigns the account codes for Account Code Entry, Verify – All
and Verify – Toll modes. If Verify – All is assigned in program
[605] "Account Code Entry Mode", an account code is required to
make an outside call. If Verify – Toll is assigned, an account code is
only required to override toll restriction.
• Code number: 01 – 24
• Account code: 4 digits
All codes – Not stored
1.
Enter 310.
Display: Account Code
2.
Press NEXT.
Display: CODE NO? →
3.
Enter a code number.
Pressing NEXT also can enter code number 01.
Display example: CODE-01:....
4.
Enter an account code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new account
code.
5.
Press STORE.
6.
To program another code number, press NEXT or PREV, or
SELECT and enter the desired code number.
7.
Repeat steps 4 through 6.
8.
Press END.
• Each verifiable account code has 4 digits, consisting of 0 – 9.
• Program [605] "Account Code Entry Mode" is used to select the
Account Code Entry mode.
Section 3, Features
Account Code Entry
Toll Restriction Override by Account Codes
System Programming

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents