108
Flash Mode for a Station Locked Extension
Description
Selection
Default
Programming
Conditions
Feature References
4-32
System Programming
4.2
Assigns whether or not an extension where the electronic station
lockout or remote station lock control feature has been set, can send
a flash signal during a conversation with an external party.
Enable / Disable
Disable
1.
Enter 108.
Display: Locked Ext Flash
2.
Press NEXT.
Display example: FLASH:Disable
3.
Keep pressing SELECT until the desired selection is
displayed.
4.
Press STORE.
5.
Press END.
None
Section 3, Features
Electronic Station Lockout
Remote Station Lock Control
System Programming