Panasonic KX-TA624 Installation Manual page 321

4.2 System Programming
Call Transfer to an Outside (CO) Line
Description
Selection
Default
Programming
Condition
Feature Reference
Enables or disables performing the Call Transfer to an Outside
(CO) Line feature.
• Jack number: 01 – 24,
• Enable / Disable
All jacks – Disable
1. Enter 606.
Display: Transfer to CO
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all jacks to the same selection, press the
this case, the display will show: #
Section 3, Features
Call Transfer, Screened – to an Outside (CO) Line
( = all jacks)
:Mixed.
System Programming
606
key in step 3. In
4-107