Panasonic KX-TA624 Installation Manual page 292

420
Calling Party Control (CPC) Signal
Conditions
Feature Reference
4-78 System Programming
4.2
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 and 6.
8. Press END.
• To assign all outside (CO) lines to the same selection, press the
in step 3. In this case, the display will show: CO
• Program [421] "CPC Detection for Outgoing Calls" is used to program
CPC Signal Detection for outgoing outside calls.
Section 3, Features
Calling Party Control (CPC) Signal Detection
System Programming
(contd.)
key
: N= Mixed.