Hinge - Toshiba QOSMIO G20 Maintenance Manual

4 Replacement Procedures
4.38

Hinge

Removing the hinge
The following describes the procedure for removing the hinge (See Figure 4-57).
1. Remove the following screws securing the hinge (L) and remove the hinge (L).
M2.5x6.0C
2. Remove the following screws securing the hinge (R) and remove the hinge (R).
M2.5x6.0B
M2.5x6.0B FLAT BIND
QOSMIO G20 Maintenance Manual (960-511)
PSP TIGHT screw
FLAT BIND screw
Figure 4-57 Removing the hinge
x2
x2
Hinge (R)
M2.5x6.0C PSP TIGHT
Hinge (L)
[CONFIDENTIAL]
4.38 Hinge
4-87