Touch Pad - Toshiba QOSMIO G20 Maintenance Manual

4.31 Touch pad

4.31 Touch pad
Removing the touch pad
The following describes the procedure for removing the touch pad (See Figure 4-44).
1. Peel off the glass tape and disconnect the touch pad flat cable from the connector on
the touch pad.
2. Remove the following screws securing the touch pad plate.
M2.0x4.0C
3. Turning up the insulator, remove the touch pad plate.
4. Peel off and remove the touch pad from the cover assembly.
Insulator
4-70 [CONFIDENTIAL]
BIND screw
M2.0x4.0C BIND
Touch pad plate
Touch pad
Touch pad flat cable
Figure 4-44 Removing the touch pad
4 Replacement Procedures
x3
M2.0x4.0C BIND
Glass tape
QOSMIO G20 Maintenance Manual (960-511)