Tv Tuner Module - Toshiba QOSMIO G20 Maintenance Manual

4.19 TV tuner module

4.19 TV tuner module
Removing the TV tuner module
The following describes the procedure for removing the TV tuner module (See Figure 4-30).
1. Disconnect the TV antenna harness from the connector PJ601 on the TV tuner
module.
2. Disconnect the TV tuner harness from the connector PJ621 on the TV tuner module
and CN5661 on the system board.
3. Remove the following screws securing the TV tuner module.
M2.0x4.0C
4. Open the left and right latches and remove the TV tuner module from the connector
CN 2220 of mini PCI slot.
CN5661
TV tuner harness
4-50 [CONFIDENTIAL]
BIND screw
PJ621
PJ601
Figure 4-30 Removing the TV tuner module
4 Replacement Procedures
x2
M2.0x4.0C BIND
TV antenna harness
QOSMIO G20 Maintenance Manual (960-511)
CN2220