Table of Contents
Advertisement
Figure 4.0-23 Quad Standard Decoder Module (with Line Doubler) VIC
4.12. Updating Software
The projector's software resides in F
projector's serial Port A. To perform an update, a disk containing the updated
Boot Software (boot.hex) and/or System Software (ssys.hex) and a PC with
W
INDOWS
Boot Manager Software and System Software are separate products—each may
be updated independently but the System Software will depend on a specific
version of the Boot Manager.
NOTE: Refer to the any System Software release bulletin for Boot Manager
version dependencies.
To perform Software Upgrade:
1.
Use a Null Modem cable to connect a PC to the projector's Serial Port A.
2.
Start W
3.
Click on the Terminal Icon from the A
4.
From the T
on DEC-VT-100(ANSI). Select OK.
5.
Under S
6.
Under T
Table 4.0-9.
HJT Model 100 User's Guide
3.1 (VT-100 Emulator) is required to perform update.
3.1.
INDOWS
, select S
ERMINAL MENU
choose T
ETTINGS
ERMINAL
P
ERMINAL
REFERENCES
Chapter 4—Setup Adjustments
M
and is updated via the
LASH
EMORY
D
CCESSORIES
IRECTORY
-T
ETTINGS
ERMINAL
P
.
REFERENCES
, select the appropriate preferences listed in
.
E
and click
MULATION
4-45
Advertisement
Table of Contents
