Table of Contents
Advertisement
Chapter 4—Setup Adjustments
The nine (9) black and white squares overlay the image on the screen.
4.9.1. Brightness
4.9.2. Contrast
4-36
Figure 4.0-18 Cont/Bright Test Pattern
To adjust Brightness:
1. Display external image.
2. Access the Cont/Bright test pattern from the T
3. Access B
RIGHTNESS
4. Use the up/down arrow keys to increase or decrease the B
setting so the blackest part of the image is equal to the black squares
in Figure 4.0-18.
5. Press E
to leave the B
SCAPE
To adjust Contrast:
1. Using external image and Cont/Bright test Pattern from previous step,
access C
ONTRAST
2. Use the up/down arrow keys to increase or decrease the C
setting so the whitest part of the image is equal to the white squares
in Figure 4.0-18.
NOTE: Contrast can be adjusted for individual colors as well as all
colors combined.To adjust only one (1) color, toggle the RGB
the color desired. Hide the other two (2) colors, and use the left/right
arrow keys to adjust. Access Test Pattern 1 (O
Cont/Bright overlay pattern.
from the P
ICTURE MENU
RIGHTNESS
from the P
ICTURE MENU
Hughes-JVC Technology Corporation
P
EST
ATTERN MENU
.
RIGHTNESS
adjustment.
.
ONTRAST
) to remove the
FF
.
to
KEY
Advertisement
Table of Contents
