Table of Contents
Advertisement
4.9.3. Color, Tint, Sharpness
4.9.4. Black Enhance
4.9.5. VIC Settings
HJT Model 100 User's Guide
The Color, Tint, and Sharpness settings are only active with non-RGB
type VICs. Begin each adjustment by displaying external image.
To adjust Tint:
1. Access T
from the P
INT
2. Use the up/down arrow keys to set the desired Tint level.
To adjust Color:
1. Access C
from the P
OLOR
2. Use the up/down arrow keys to set the desired Color level.
To adjust Sharpness:
1. Access S
HARPNESS
2. Use the up/down arrow keys to set the desired Sharpness level.
The Black Enhance feature increases the low level detail in the dark
areas of the image. Adjust the Black Enhance if the dark areas of the
image still do not show enough detail after completing the other picture
settings.
To adjust Black Enhance:
1. Select B
E
LACK
NHANCE
2. Press E
to toggle.
NTER
3. Select the setting that provides the best detail in the dark areas.
To select specific VIC Option Settings when setting up a new channel:
1. Access VIC S
ETTINGS
allow the operator to select specific VIC option settings when setting
up new channel.
2. Press escape if the projector uses only one VIC. If the projector has
more than one VIC option, refer to Section 4.11 on page 4-39 for
details on how to set up for optional VICs.
3. VNR (V
N
IDEO
OISE
option reduces noise in the image but also reduces detail because it
narrows the video bandwidth. Use trial and error to determine if this
VNR option is appropriate for the image being viewed.
Chapter 4—Setup Adjustments
.
ICTURE MENU
.
ICTURE MENU
from the P
ICTURE MENU
from the P
ICTURE MENU
from the P
ICTURE MENU
R
) is available in the submenu. This
EDUCTION
.
.
. A submenu appears to
4-37
Advertisement
Table of Contents
