Table of Contents
Advertisement
Chapter 4—Setup Adjustments
4.3.5. Linearity (G)
Vertical Linearity Distortion. Use up/down arrow keys to correct.
Figure 4.0-8 Linearity Distortion (horizontal and vertical)
4-16
The Linearity adjustment corrects for improper horizontal or vertical grid
spacing on an image. With distorted linearity, lines in the grid are spaced
closer together on one side and farther apart on the other (refer to Figure
4.0-8 Linearity Distortion).
To correct for Linearity Distortion:
1. Select L
INEARITY
2. Toggle the RGB
KEY
3. Use the H
IDE KEY
4. Use left/right arrows to correct horizontal linearity distortion and
up/down arrows to correct vertical linearity distortion. Make grids the
same width on the left/right side and the same height at the top and
bottom.
5. Use E
L
DGE
INEARITY ADJUSTMENT
correction.
6. Press E
/E
SCAPE
NTER
from the G
EOMETRY MENU
to select G only.
and hide R and B.
to perform additional linearity
to exit.
Hughes-JVC Technology Corporation
.
Advertisement
Table of Contents
