Table of Contents
Advertisement
Chapter 4—Setup Adjustments
4.10. Backing up Settings
The source file parameters previously set up (and any other source files attached
to one channel) can be copied to another channel. Copy parameters if the source
has the same basic parameters but different picture settings. A channel can be
set up for a source with picture settings specific to that source, then copied to
another channel. The channel receiving the copied information can have the
picture settings adjusted for the image that will be received on that channel—two
(2) channels are now set up for the same type of source but with different picture
settings. This function saves time and also backs up the settings from the original
channel. When copying from one (1) channel to another channel, verify that both
channels use the same type of VIC. This can be determined by accessing the
S
YSTEM
types.
To Copy Settings from one channel to another channel:
1.
Access the C
(highlight by pressing the number or scroll with arrow).
2.
Press M
3.
Select C
and attached sources into a Paste Buffer.
4.
Highlight the channel to P
5.
If all of the sources that were copied from the first channel are not needed in
the second channel, they can be detached from the second channel.
Change to the S
arrow keys, then deselect by pressing E
channel.
6.
These "copied" channels can be adjusted for Picture and Timing to match
any incoming source for the new channel without affecting the original
source from the first channel. Gemometry, Conversion, and ILA
"shared" by the Source File.
NOTE: For convenience store a list of all available sources in one specific
channel. This can be used as a source "master" list. For example, have all
available sources attached to Channel 99. Use this as a master list from
which any source can be attached at any time. Having all available sources
in one "master" channel avoids having to remember where any specific
source is located and the time involved in hunting through various channels
to find a particular source.
4-38
-M
AINTENANCE MENU
HANNELS MENU
on the remote.
ODE
from the submenu. This copies the channels' name, VIC path,
OPY
CAUTION!!!
L
OURCE
and selecting S
TATUS
and highlight the channel that is to be copied
T
; press M
ASTE
O
ODE
Verify that the channel copied to is blank.
, then select the unwanted sources with the
IST
NTER
Hughes-JVC Technology Corporation
L
, which shows the VIC
IST
, select P
.
ASTE
to detach them from the
®
Setting are
Advertisement
Table of Contents
