Table of Contents
Advertisement
Chapter 2—Installation
3.6.4. Menu Selection Examples
3-10
Three (3) examples of selections made using numbered menus follow.
See Figure 3.0-3 on page 3-11 for a Menu Structure Diagram.
To select the test pattern for Linearity:
1. Press M
(and E
ENU
2. Select the S
YSTEM
3. From the S
YSTEM
4. From the T
P
EST
ATTERN
5. The standard crosshatch test pattern appears on the screen.
To select Linearity for adjustment purposes:
(Continue from the above test pattern selection.)
1. Press M
and/or E
ENU
2. Select the G
EOMETRY
3. From the G
EOMETRY
4. The Linearity adjustment window appears on the screen.
NOTE: It is also possible to move from side to side in the menu tree.
For example, when in the S
go to #4, T
, (above second example) press the left arrow three
IMING
(3) times to move three (3) places to the left. To move back to the
S
menu, press the right arrow three (3) times. During setup
YSTEM
adjustments this feature can save time when moving between Picture,
Timing, Geometry, and Convergence.
To select a Video Switcher:
1. Under M
S
ENU
ETUP
2. Select a baud speed of 9600 if the switcher is connected to Port A
OR a speed of 19200 if the switcher is connected to Port B.
NOTE: Switchers are recommended to be connected to Port B.
This allows for B
OOT
ANSI terminal when software upgrades are needed without the need
for reconfiguring the ports.
3. Turn power off with the remote, or PC to shut the system down.
4. Restart the system to activate changes (cycle AC power off and back on).
Add a third digit to VIC channel assignment to show that a switcher is
being used (see Section 4.11 on page 4-39 about Video Input Cards).
, if necessary) to display the M
SCAPE
menu.
menu, select T
P
EST
ATTERN
list, select X-
HATCH
to display the M
SCAPE
menu.
menu, select L
INEARITY
menu, #7, (above first example) to
YSTEM
, Port A or Port B device, select V
M
to be connected to Port A through the
ANAGER
Hughes-JVC Technology Corporation
M
AIN
ENU
.
.
M
.
AIN
ENU
.
S
IDEO
WITCHER
.
.
Advertisement
Table of Contents
