Sharp UX-2200CM Service Manual page 9

UX-ZZOOCMU/CMC
FO-215ochIu/cMc
5. Loading Printing Paper
@ Press the START key.
The display on the Sharp Color MFP will show:
SELECT CARTRIDGE
Press 1 if you installed a new cartridge, or 2 if you installed an
old cartridge.
Press the 3 key if you installed a new black cartridge, or the
4 key if you installed a new color cartridge.
(When installing a previously used cartridge, press the 1 key for
a used black cartridge or the 2 key for a used color cartridge.)
NEW BLACK CART. NEW COLOR CART.
0
3
or
0
4
*The cartridge will return to its home position, If you pressed 3
or 4 for a new cartridge, the Sharp MFP will print a test page
for printhead alignment.
If you installed a new print cartridge, look at the test page and
locate the line that comes closest to foning a perfectly straight
line.
In this example, line 13
comes closest to
Aming a straight line.
Press these keys on the Sharp MFP:
The display will show: ALiGN CARTRIDGE
ENTER (00-30) 15
START: PRINT
Enter the two-digit number of the straightest line on the test
page. (If the number is less than 10, enter a 0 before the
number.)
Example: Line 13 @ @
The display will show: ICLEAN NOZZLES
]
Press the STOP key to return to the time and date display.
STOP
/
0
Note:lf you have installed a color cartridge, the display will
show the following alternating messages:
ICOLOR CARTRIDGE1 1
USE BLACK FOR RX 1
You can load letter or legal size paper in the paper tray. The maximum
number of sheets is:
4 266for paper from 16 to 20 Ibs. (60 to 60 g!m2)
l
15Ofor paper from 20 to 24 Ibs. (90 g/m2) (such as coated paper)
@ Remove the paper cover if it is on the paper tray.
. If you are going to load legal size paper, flip up the paper tray
extender.
Q Fan the paper, and then tap the edge against a flat surface to even
the stack.
@Pull the paper release plate toward you.
@ Insert the stack of paper into the tray, print side up
. If paper remains in the tray, take it out and combine it into a single
stack with the new paper before adding the new paper.
@Replace the paper cover on the paper tray.
@Push the paper release plate back down
. Important Be sure to replace the paper cover before you push the
paper release plate down.
l-7