Table of Contents
Advertisement
[5] Quick reference guide
1.
2.
3.
l
4.
5.
6.
7.
0
CARTRIDGE
Press:
r-r
I
1
Open the front cover of
the Sharp Color MFP.
Remove the current print
cartridge.
If the cartridge is still
useable, insert it in the
holder on the back of the
machine. Push backon the
cartridge until it snaps into
place.
If you are installing a
new print cartridge,
remove the cartridge
from its packaging.
Remove the sticker and
tape from the cartridge.
Insert the print cartridge
into the cartridge carrier.
Push back until it snaps
into place.
Press:
Display shows:
SELECT CARTRIDGE
Press
1
if you installed a new cartridge , or 2 if
you installed an old cartridge.
If you pressed
1
for a new cartridge, then the
display will ask you what type of cartridge you
installed. Press the 3 key for a new black cartridge
or the 4 key for a new color cartridge.
The sharp MFP will print a test page for printhead
alignment.
8. Close the front cover.
9. If you installed a new print cartridge, press:
Display shows:
ALIGN CARTRIDGE
lO.Enter the two-digit number of the straightest
line on the test page.
ux-22o0cMu/cMc
FG-215ocMuKhK
1.
2.
3.
4.
5.
Place the document
(up to 20 pages) face
down in the document
feeder.
If you are copying onto a
transparency or special
paper, flip up the original
document output support
i
_
,'
and insert the media into
/1
the manual paper feeder.
Press:
?XV
I
Press
1
to use the preset copy settings, or 2
(MANU) to select each setting individually.
If you are making one copy per original, press
the START key. If you are making multiple
copies per original, enter the number of copies
per original (if the number is less than 10, enter a
"0" before the number).
l
If you selected PRESET in Step 4, go to Step 10.
6.
7.
8.
9.
Enter a number for the size of the printing media:
1:
LmER
2: LEGAL
3: A4
Enter a number to select reduction/enlargement.
1:
AUTO
2: 50%
3: 75%
4: 100% (no reduction or enlargement)
5: 120%
6: 150%
Select the type of media to be used:
1:
PLAIN PAPER
2: COATED PAPER
3: TRANSPARENCY
(Note: Setting 3 only appears if you inserted a
sheet of media in the manual feeder.)
Select the copy print quality. Press
1
for
NORMAL or 2 for DRAFT.
lO.lf desired, press the RESOLUTION
key to adjust
the resolution and/or contrast (the default
settings are FINE and AUTO).
11 .Press START to begin copying.
STOP
11. Press:
n
D
l-9
Advertisement
Table of Contents
