Table of Contents
Advertisement
UX-22oocMu/cMC
Fo-216ccMu/CMc
3. 7. Memory clear
This mode is used to clear the backup memory and reset to the
default settings.
3.8. Shading mode
This mode is used to store the shading waveform according to the
specified shading document.
3.9. All black print
This mode is used to check the state of the printing head and inten-
tionally overheat it. Press STOP key for the end.
3.10. Auto feeder mode
This mode is used to check the auto feed function by inserting and dis-
charging the document. In this mode, the feed of the document will be
automatically tested if the document is set. Moreover, the number of fed
documents will be counted and be displayed on LCD.
3.11. Entry data send
This mode is used to send the registered data to the remote machine
and make the remote machine copy the registered information.
When
this mode is used for sending, the remote machine must be set to the
entry data receive mode.
This information to be sent is as follows.
1. TELEPHONE
NUMBER LIST
2. PASSCOD LIST
3. OPTION LIST
4. ANTI JUNK LIST
5. GROUP LIST
6. PRINT SET UP LIST
7. SOFT SW LIST
3.12. Entry data receive
This mode is used to receive the registered data which is sent from the
remote machine and to register the received data in the machine.When
this mode is used to receive the information,
the remote machine must
be set to the entry data send mode
The information to be sent is as follows.
1, TELEPHONE
NUMBER LIST
2.
PASSCOD LIST
3. OPTION LIST
4. ANTI JUNK LIST
5. GROUP LIST
6. PRINT SET UP LIST
7. SOFT SW LIST
3.13.001
sensor mode
This mode is used to check whether the ink sensor can detect
nonexistence
of ink correctly.
3.14. DOT COUNT READ
The black, cyan, magenta and yellow ink consumption
counter value
is indicated.
2-4
Advertisement
Table of Contents
