Operation Panel - Sharp UX-2200CM Service Manual

UX22OOCMU~~C
Fo-21gocrvlu/cMc
[2] Operation panel
cO10r Multifunction
,_-______-_____---__--.
0 SPEED DIAL key
Press this key to dial a 2digit Speed Dial number.
@ REDlALkey
Press this key to automatically redial the last number dialed.
@ VOLUME keys
Press these keys to adjust the volume of the handset when the handset
is lifted, the volume of the speaker when the SPEAKER key has been
pressed, or the volume of the ringer at all other times.
0 IR IN USE light
This blinks while the Sharp Color MFP is receiving data by infrared
transmission from a notebook computer, digital camera, or Zaurus.
0 Display
This displays messages and prompts during operation and
programming.
0 COLOR CARTRIDGE light
This lights when a color print cartridge is installed. Faxes are received
to memory when this light is on.
@
LINE IN USE light
This lights while the Sharp Color MFP is using the telephone line.
0 PRINTERkey
Press this key to eject paper from the machine, or reset the machine
after clearing a paper jam or other printer error.
0 CARTRIDGE key
Press this key to change a print cartridge or install a new print cartridge.
0 Number keys
Use these keys to dial numbers, and enter numbers and letters during
number/name storing procedures.
0 SPEAKERkey
Press this key to hear the line and fax tones through the speaker when
sending a document.
Note:This is not a speakerphone. You must pick up the handset to
talk with the other party.
@ HOLD/SEARCH key
Press this key to search for an automatic dialing number, or, during a
phone conversation, press this key to put the other party on hold.
@ RECEPTlON MODE key
Press this key to select the reception mode. The selected mode will
appear in the display.
@ COPY/HELP key
When a document is in the feeder, press this key to make a copy. At
any 0-r time, press this key to print out the Help List, a quick
reference guide to the operation of your fax.
@ START key
Press this key to send or receive a document.
@ PANEL RELEASE
Pull this release up to open the operation panel.
@ STOP key
Press this key to stop operations before they are completed.
@) RESOLUTION key
Press this key to adjust the resolution and contrast before sending or
copying a document.
@ MEMORY key
Press this key to scan a document into memory before transmitting it.
@ FUNCTION key
Press this key to select various special functions.
Q, Rapid Dial Keys
Press one of these keys to dial a fax or voice number automatically. To
dial the bottom number on a Rapid Key, press the SHIFT key before
pressing the Rapid Key. (Note that you must attach the Rapid Key
labels.)
l-2