Table of Contents
Advertisement
ux-22oOcMUt~c
FO-215ocMu/cMc
0
The Sharp Color MFP has been set at the factory to scale the size of
received faxes to letter size paper. If you have loaded legal paper,
you must change the paper size setting to legal. Press these keys:
The display will show:
1
PAPER SIZE
I
Presst to select LETTER,2 to select LEGAL, or 3 to select A4.
LETTER:
@
LEGAL:
0
A4:
@
Press the STOP key to return to the date and time display.
Kl
Note:This setting is only for received faxes. To set the paper size for
printrng from your computer, see your online Operation Guide.
@ The Sharp Color MFP has been set at the factory to print on plain
paper. If you have loaded coated paper, you must change the media
type setting to COATED. Press these keys:
The display will show:
MEDIATYPE
Presst to select PLAIN or 2 to select COATED.
PLAIN
COATED
Press the STOP key to return to the date and time display.
KI
6. Clearing
Paper Jams
Clearing a jammed document
If the original document doesn't feed properly during transmission or
copying, or DOCUMENT JAMMED appears in the display, first try
pressing the START key. If the document doesn't feed out, open the
operation panel and remove it.
Important
Do not try to remove a document without opening the operation
panel. This may damage the feeder mechanism.
0
Pull the release marked PANEL RELEASE
up and open the
operation panel.
Q
Remove the document.
0
Close the operation panel, making sure it clicks into place.
Clearing jammed prlnlng paper
@ Open the front cover of the Sharp MFP.
Q Grasp the leading edge of the jammed paper and pull it out of the
machine.
@ If it is too difficult to pull the jammed paper out from the front of the
machine, remove the paper tray cover, pull the paper release plate
toward you, and pull the jammed paper out from the back of the
machine.
t
@ Make sure there are no torn pieces of paper remaining in the
machine.
@ Close the front cover. Replace the paper tray cover (if removed),
and then press the paper release plate back down.
@ Press the PRINTER key to reset the Sharp MFP.
PRINTER
l-8
Advertisement
Table of Contents
