Table of Contents
Advertisement
ux-224mcMu~cMc
m-215ocMu/cMc
[2] Disassembly
and assembly procedures
l
This chapter mainly describes the disassembly
procedures.
For the assembly procedures,
reverse the disassembly
procedures.
l
Easy and simple disassembly/assembly
procedures
of some parts and units are omitted. For disassembly
and assembly of such parts and units,
refer to the Parts List.
l
The numbers in the illustration, the parts list and the flowchart in a same section are common to each other.
l
To assure reliability of the product, the disassembly
and the assembly procedures
should be performed carefully and deliberately.
l
Note on changing cartridges
:
To prevent the used print cartridge from drying out, be sure to store it in the cartridge holder.
1
Rear Cabinet,
Paper Feed Unlt
Handdet
Holder,Printer
Back Cabinet
(Al 1x2
PUS
. Cabinet
Disassemblv
orocedures (Fia. 1)
STEP REMOVAL
PROCEDURE
1
Rear Cabinet
1. Screw (3x12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Al) x 2
2
Document Tray
1. Push inside the Document Tray arms . ...@
3
Paper Feed Unit
1. Screw (3x6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Bl) x 1
4
Handset Holder
1. Open the Operation Panel Unit
2. Screw (3x12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Cl) x 1
3. Release the Handset Holder lock nails ..@
5
Printer Back Cabinet
1. Screw (3x10) .__..._.._.___...._.............
(01) x 2
Paper Feed Unit
Handset
Holder
i/
I
Fig. 1
Advertisement
Table of Contents
