Dial-Up Networking Function - Toshiba DP4500 Service Handbook

6.1.3 Dial-up networking function

The settings necessary for the PPP are described in this section. The dial-up networking function is
used to perform the PPP connection on the Windows 95/98.
(1) Virtual modem
Since a modem is supposed to be used for the Windows 95/98 dial-up networking, download a virtual
modem to enable the connection performed directly with a serial cable.
(2) Installation of virtual modem
Download the following file from the web.
URL:http://www.kevin-wells.com/net/mdmcbx4.inf
After the above file was downloaded, install the modem as follows.
Click the "Modems" button on the control panel to display the following window, then click [Add].
December 2000 © TOSHIBA TEC 6 - 3 DP4500/3500 UPDATING THE FIRMWARE