(2)
New file
New files with the preset directory and names are provided in the following folder.
C: \WEBSHARE\FTPROOT
New files:
- Program data
- Fixed UI data
- Common UI data
- 1st language UI data
- 2nd language UI data
- 3rd language UI data
- 4th language UI data
- 5th language UI data
(3)
Connection between the copier and PC
The copier and PC are connected with a cross cable.
Note: Do not connect serial cable with machine power turned ON.
Connect the MMF(FSMS) port of the copier and serial communication port of the PC which is speci-
fied when the virtual modem is set up.
DP4500/3500 UPDATING THE FIRMWARE
sysfirm.tz
uidataF.tz
uidata0.tz
uidata1.tz
uidata2.tz
uidata3.tz
uidata4.tz
uidata5.tz
6 - 18
December 2000 © TOSHIBA TEC