Table of Contents
Advertisement
(2) SET FUNCTION
You can refer to and change the set values in each table (FUNC, UAD, TEL FUNC, EX TYPE, ACC DGT,
PCFUNC) for function programming.
<Key used in operation>
When READY is displayed
PROGRAM
*
#
*
*
Select TEST MODE
SET
Select MAINTENANCE
SET
Select SET FUNCTION
Cancel
SET
Select function menu
SET
Enter setting value
SET
Notes: 1. *1 : Displays the numeric value currently set (cannot be changed).
2. *2 : Displays the numeric value to be entered now (Can only be altered at the point of the
cursor).
3. Bit 7 is shown on the LCD display as the left most digit.
4. By entering 1 or 0 in the bit with the desired function, the function is to be set.
5. Press the SET key to store the new setting and advance the next function.
GD-1060 ADJUSTMENT ITEMS
Press the PROGRAM key
Enter SERVICE MODE
Use
and
keys
Use
and
keys
Use
and
keys
Use
and
keys
1 - 94
<Display messages>
PROGRAM
01.DEFAURT SETTINGS
02.LISTS
03.INITIAL SETUP
***SERVICE MODE***
03.INITIAL SETUP
04.MENU MAP
05.TEST MODE
TEST MODE
03.PRINT TEST RESULT
04.FUNCTION TEST
05.MAINTENANCE
MAINTENANCE
01.MEMORY CLEAR
02.SET FUNCTION
03.MEMORY WRITE
SET FUNCTION
FUNC
SET FUNCTION
FUNC 0= 11010110
11010110
Bit 7
January 2001 © TOSHIBA TEC
*1
*2
Bit 0
Advertisement
Table of Contents
