Toshiba DP4500 Service Handbook page 235

6. The copier starts updating when the [START] key is pressed.
Do not turn OFF the power of the copier or PC, or disconnect the cable after the [START] key
has been pressed.
Interruption during the file transmission to the copier will destroy the file in the FROM of the
copier. The data must be reinstalled.
In case of target 1 - 8 :
In case of target #1 - #3
DP4500/3500 UPDATING THE FIRMWARE
Firmware Version Up Mode
Installing new firmware.
— reading a file.
Firmware Version Up Mode
Installing a new firmware.
— reading a file.
Target Version
l installing
Displays the area being processed
6 - 22
Target: 1
Displays the status of updating
process.
– reading a file.
– erasing the device.
– writing to the device.
Target:#1
code
December 2000 © TOSHIBA TEC